hey im looking to lower my sunfire soon, my rear struts are blown so i thought now is as good of time as any to do it.........
im planning on ordering the KYB AGX struts and the Eibach Pro-Kit from summit,
my question is with this set up what all other parts would i need to order to put it all together? thanks for your help
i would get new strut mounts. other then that. your good to go
where is a good place to get good strut mounts from? i know thats kinda a wide open question but im not really sure cuz i've never messed with any of this other then taking a complete strut/spring assembly off one j and putting it on another lol
OEM on here makes some dam good solid strut mounts for our cars.
2010 Lonestar Bash 2nd place J-Body Street Class
i saw those, so all i need to buy is the struts, springs, and mounts and thats it? nothin else right?
An alignment afterwards. I didnt get an alignment when i swapped suspensions back in June and i have gone threw 2 set of tires already.
its an old concept. time for something new to take the reigns. - Z yaaaa
^^^^this an thats about it, or you can snag some strut bars since you going to have the top screws off anyways or even put in some polyurethane endlinks to your front sway bar.
2010 Lonestar Bash 2nd place J-Body Street Class
i have a freedom design front upper strut bar on right now, was thinking about a rear one though, where can i find the endlinks?
endlinks can be found anywhere pretty much, locally i used autozone, but you can get a full front end suspension kit from rksport i believe, not sure about them, or turbotechracing.com they are a very trust worth site to get stuff from.
2010 Lonestar Bash 2nd place J-Body Street Class
so might have changed my mind about lowering since i found this..........
http://www.summitracing.com/parts/KYB-SR4025/?rtype=10
anyone have any experience with this assembly? just lookin to replace my two rear struts since there shot and since im going to school and raising my two boys i dont ha much time to sit and assemble stuff
i have KYB rear strut kit, mines make a noise when i go in reverse and when i jack the car up, so if u get those and later they make noise or not maybe its just mines.
~1996 Cavalier LS 2.4L (auto)
im goin between this and the monroe kit, this one was cheaper though, i just know right now i bottom out in the rear on every little bump and its bouncy as hell constantly
