Can anyone tell me if the harness for the front ABS sensors are the same for all gen 3 cavs? I need to get one but not sure if a 95-99 would work for my 02.

Yes they are

This is the problem I am dealing with. The tan wire is corroded from the harness all the way up to the main loom under the radiator. Maybe further. I was thinkin about runnin a new wire from the ABS module to the harness when I get the new one. The wires were twisted together in the loom, do they need to be that way when replaced?

Being twisted cancels out any interference for the length of the twisted pair. All ABS sensor wiring should be twisted for the full length of the run.

Thats what I thought. Thanx John and Jason

http://www.dormanproducts.com/p-14012-970-007.aspx

Thanx Spencer. AutoZone and Advance Auto both told me over the phone that they dont sell these. I searched using the part number from the Dorman website and apparently the do but they have to be ordered. I dug a bit deeper and Rock Auto has them way cheaper than the retailers and put the dealer to major shame on price also. Thanx all for your assistance

I removed my abs, i have the full wiring intact and de-pinned from the connector. only issue is that i wouldnt be able to get it to you till after xmas break cuz i left all my wiring at my apt down at college.



actually i do think i have a spare harness here but pm me.

if you have an oreilly around you give the number to them
http://www.oreillyauto.com/site/c/search.oap?keyword=970-007

showing to be in our DC, at least in my area. Indiana.


Edited 1 time(s). Last edited Monday, December 20, 2010 7:18 PM