I'm running new stock gm strut and shock mounts rksport prostreet full coilover system,gm strut brace,rk subframe brace, and rear sway bar, prothane control arm bushings new moog balljoints and tie rods. So basically everything except for a rear stut bar. So my ? is should I get one or will it just be overkill? if so which bar do you guys think I should get. thanks
So do I need a rear strut bar for handling or not with my setup?
I think that it will add to what you have. It will help the rear to flex less.
Chassis bracing is NEVER a bad thing
I have the rear one it helps and even a mid brace won't hurt that's what will be doing I am running the Koni yellow set up with addco front and rear sway bars the ttr k brace along with the front and rear sway bars also gonna run the polyurethane control ARM bushings and most likely the rear trailing ARM bushings... U deffinently won't regret the extra bracing......
Ok cool thanks for the help guys. Now which rear brace should I get and were's the best place to order one? I've searched online and haven't found much
I am just running a upper strut tower brace from eBay I know vibrant makes one....
Do the rear stb also pay for a custom 4wheel alignment zero rear toe -.5camber on the rear. And a upper engine mount if you dont have one. Funny thing is the engine and trans mounts have alot to do with the ablity to put power down comming off a corner.
see ya!
Yea I have the prothane total kit done and love it prolly one of the best mods engine upper lower, 5 speed tranny mounts control arm bushings front sway end links. I would like to do the rear trailing arms you guys are talking about though??? We're can I get a pair of those puppies
