I was wondering if anyone has done this lately and have the dia. and fittings I would need to buy to replace the rear brake lines on my car.
I have a 95 base 2 dr 2.2 5sp.
I see there are different dia. tubing to buy and didn't know if anyone knew what I might need or what the difference is.
Just go to a wrecker and pull the lines you need. I did it when I did my eco swap and it cost me like $30 and all the lines were perfect.
Im pretty sure they are 3/16"
good luck finding decent ones at the yard, but theyre out there. 30" piece will do you fine new from the parts store. Make sure is ISO flare (bubble flare) with M10x 1.0 thread, usually the dark green flare nuts.
