okay i've got a 2.2 ecotec and i hear you have to move the pcm to another loaction am i correct? if so could anybody post me a picture i looked but i really can't find anything, thanx.
You dont HAVE to move it, but you can if you want.
Look here ->
http://www.influx.ca/pics/stb/
This is what I did with my car, but like I said, some guys have just bent the bracket and got it to fit fine, you just have to adjust the brace off the car because you can't spin it to tighten it with the PCM in there.
_______________________
Project L61 - Slowly but Surely
16.2@82.54 Auto w/ Intake and Exhaust
14.9@89.79 w/ a Blower
and here is a pic with the PCM in place.
it can be done both ways.
_______________________
Project L61 - Slowly but Surely
16.2@82.54 Auto w/ Intake and Exhaust
14.9@89.79 w/ a Blower
I installed the GM STB. I took the mount of the PCM. Then I bent the bracket so the the PCM was vertical instead of horizontal. Then I mounted it to a bolt on the firewall next to the AC dehydrator.
Sorry no digital camera for pics.
