well i just got my air ride kit in today and it looks very hard to put in. not the struts n stuff like that, but the wireing part.. does any one know were theres a good wiring picture on how to do the setup with f.b.s.s? a little hep
Thanks
didnt it come w/ instructions? its easy. each valve has a power and a ground. i ground both the fill and dump together for each corner. then i ran the power to the colored wire it needed to go to on the switch box. its really simple, just time consuming
if I had your email ted I would send you the diagram I used which worked fine. Either msg me on here or email me blkcavy98@hotmail.com
I will send it to you
This is how mine is wired:
Link HERE!!!!
<img src="http://registry.gmenthusiast.com/images/bossman/personal_pic.jpg"></img>
man theres to many wires!!!!!!
what kit do you have? if its the easystreet kit, its @!#$ simple! if you got easystreet each valve has 2 wires. a power and a ground. what i did was take each corner and ground those to together. then i ran the power for the valve to which wire it needed to go to on the switch box (which is pre-wired to make it even more easier). then all you have is the compressor. ground it and run a power to the pressure switch. i added an extra to the pressure switch so i can switch the compressor on and off from my dash. its really not hard. just take your time, sit down and look at your kit. if you need help just shoot me over an email
thats why i got the new digital system.
wheres the cheapest place to buy an air ride kit and is it legal in pa , will it pass inspection
domeztik wrote:thats why i got the new digital system.
whats this new digital system you talk of? are you just talking about digital gagues?
jason at aplusperformance.com can get you a good deal on the easystreet kit. yes it will pass inspection. i lived in pa and my car passed
well yea its digital gauges and digital switches. you pech buttons instead of hitting switches. these is not that much wiring its more wiring harnesses that plus in together. it is supposes to be alot more accurate. put it like this there is independent wheel control all up,down and ride hight and side to side ans front to back all with just a push of a button. and it has the psi and all kind of stuff on it. if anyone wants to know more about it call easystreet and talk to someone about it. thats what i got from it. mine ships out tomorrow so when it gets here ill tell yall more about t and give yall some pics.
Key Features:
- One Touch Ride Height
- Auto Ride Height On Start
- Individual Wheel Control
- All Inflate and All Deflate Buttons
- Accurate Manifold Mounted Transducers
- Digital Voltmeter
- Auto Leak Detection
- Tuning That Learns Your Vehicles Suspension
- Compatible with our Digital Dampening System
- One Wire Into Dash
yea but you still have to wire up the valves
$600. but i got mine as a free upgrade. easystreet is give them with request with all full systems this month.
I'll tell you what, that digital system from easystreet is very slick. Installed my first one last week at work on a customers sunfire. And now I think I am going to be getting one myself. It's really cool.
Tony
yea they look @!#$in' awesome, id love to have a digital setup but for 600 bucks i dont mind the 2 gauges and switch box.
[quote=ßãggéÐÇåv98 (Ûñqùðtäߣè Øñé)]yea they look @!#$in' awesome, id love to have a digital setup but for 600 bucks i dont mind the 2 gauges and switch box.
$600 is suggested retail remember
www.TaillightTinting.com #1 SOURCE FOR VHT NITE SHADES
www.aPlusPerformance.com BACK ONLINE SOMETIME SOON!
PHONE 763-682-9945
