hard stored engine check code - Third Generation Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
hard stored engine check code
Wednesday, April 30, 2008 10:00 AM
ok on the 97 cavalier 2.2 3 speed auto the check engine light is on permanently regardless of what you do

did replace the 02 sensor

new secondary wires

is a bit of a roughness in the idle
and it idles at a bit slow of an rpm

otherwise it runs great and strong and everything

the trans converter has been weak for a long time in the thing, to where i know that the engine has been strained hard for a long time to get the car moving from a dead stop due to the converter not doing its job very well for who knows how long

160k miles

what is recommended that we do here ?

should i try cleaning out the EGR valve or IAC valve ?

or is it something more/different probably ?

thanks

-96 cavalier 2.2 auto 143k miles

Re: hard stored engine check code
Wednesday, April 30, 2008 10:28 AM
Have you ever had it scanned to see what the code actually read instead of throwing parts at it. Also have you tried removing the code with a scanner as well?


2009 Ford Mustang V6
Re: hard stored engine check code
Wednesday, April 30, 2008 10:44 AM
The code isnt there permantly. Get a code reader, read the code, fix the problem, and clear the code.



Re: hard stored engine check code
Thursday, May 01, 2008 6:34 PM
There are a couple hundred possible codes that could turn on that light.... might be a leaking gas cap, it might even be a misfire. You'll never know til you get the code scanned.



Re: hard stored engine check code
Thursday, May 01, 2008 7:44 PM
well mr wabbit, you gotta find out what the code is. as stated by others. And you have to be able to clear it after you fix the problem. There is no way around it.


01 cav w/01 3400 gam gt 4t45e

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search