Just wondering how you 3400's wired in the temp gauge cars running and sounds awsome all it wants to do if you give to much throttle in 1st is spin though lol
I just left the v6 temp sensor unplugged and plugged in my 2.2 coolant wires.. WA LA.. a working temp gauge in my dash... not sure if the v6 ecu not seeing temp affects anything however. Speedo is hooked up like this to, but i have it wired to both ECU's.
- Your not-so-local, untrained, uncertified, backyard mechanic. But my @!#$ runs
do you have both PCM hooked up??? if not then your gonna be into all autometer guages or switch you cars interior wiring over to 00+ then changine you engine harness to an impala and running factory gauges other then that 95-99 gauges wont work
JBO since July 30, 2001
I have the stock temp gauge running.
Since I have 2 ECU's, I need both to see the coolant temp. Since I didn't want to drill and tap a spot for a second sensor, I just went with the GM 3-wire CTS.
www.gmscf.com
I have 2 ecus in it,All I have for gauges is speedo and fuel I dont have temp or tach.The car works awsome though,except its leakign powersteering qq=uite abit looking at that today,Hmm I'll try those ideas out thanks guys
That's how mines set up with the 3 wire. That way the MS and the stock ECU (temp gauge only) can both read the engine temp using the same sensor. If I try to hook it up with a 2 wire sensor, then the stock ECU reads right and the gauge points at 195, but the MS only registers 90 for the coolant temp, which leaves it in warmup mode and makes it run rough.
I still aint got the tach thing going though. I haven't played with it much, but eventually i'll figure out how to get that damn gauge running on that V6.
www.gmscf.com
somethigns not wired right if those are the only guages you got since, thats a symptom of only the 3400 pCM being there might wanna check your wiring on it or switch to 00+ gauges and impala PCM
JBO since July 30, 2001
ah alright gonna be runninga seperate temp gauge anyways I think going to mess around with it tues and fix powersteering leak
Z34 cavy -3400 Swapped
iv only got 1 and a half more projects before i start my new swap
my kill list:a geo metro and a mac semi wow did i kill that thing
you a busy man haha what are your other projects
Z34 cavy -3400 Swapped
i got 3 engine harness to do fix up a turbo down pipe and finish my doors i'm swamped right now, luckly 1 is my new one and 1 will be done this week
ps mike when i get my new harness done i will have my current one forsale if your interested fo a 99
JBO since July 30, 2001
well i have a 70 chevy truck with a 68 nose that i need to finish putting the motor in then i have an 86 suzuki samurai that im putting toyota axles under and putting 35" tires on but my 70 chevy is running now i just need a few days to get it moving
my kill list:a geo metro and a mac semi wow did i kill that thing
Wow busy people ,Yeah maybe let me know,You'll have to send some of those truck pics man
Z34 cavy -3400 Swapped
