i was just wondering i had a 50 dry shot on my car at one point and it kept throwing the rocker arms of and misfireing, i have replaced the lash adjusters,no luck ,my coil on is good and its not my injectors, the only thing i can figure is a defaulty valve spring causing it to float a valve and then pop off a rocker arm. any suggestions would be greatly appriciated.
the eco has no rockers
dual cam over head
Only ways i've seen J's misfure have been because of spark plugs! Atleast that's the case with nitrous most the time. Anything other than that is something terribly terribly bad! Floating vlaves crushing pistons and ehhh nasty things!
N2O + Bolt-ons
= 220Hp/
250Tq
Coming Soon:HpTunersPro, EagleConnectingRods, WiescoPistons, 13sec2200
J R wrote:the eco has no rockers
dual cam over head
it has roller rockers..
The Only thing Gayer than my cavalier is the purple shade of its nitrous bottle
it has finger followers...not rockers. Rocker Arms are on pushrod motors. And theres no lash adjusters, or adjustment, on an ecotec motor. I'm guessing you have a 2.2L OHV motor.
Please get a clue and then you'll be able to solve your problem.
I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
actually it does have lash adjusters i have already replaced two of them with no luck it still missfires. i do have the ecotec engine also.
it just bothers me that mine is the only one on the org that has had this problem.
your probably not the only one, its just my opinion I would not use a dry kit on any car its just not safe, you cannot rely on the stock ecu to inject enough fuel in for you, thats the reason its best to have a wet kit which injects the fuel as well.
