i was wondering if you guys could let me know if i have everything i need or what else i would need to set this kit up. Also if you guys could tell me how to hook it up that would be helpful.









Thats what i have its a wet kit

1 Selenoid NOS 200 HP
1 Selenoid Fuel
1 Micro switch
1 MSD Windows switch with fuse rpm include
1 Bottle 25 lbs Full Of Nitrous (70$ nitrous)
1 Bottle Heater
1 Fogger 80 Hp JET
1 Fuel regulator brand new with gauge
1 Bosch Relay
2 Brackets bottle
All wirings and nitrous line!

that is what i was told came with it is it all there?

parts wise, looks like its all there (from the list, not in the pics)

as far as wiring it up......

Switched Ignition power to the relay.
Ground to the relay.
Switched power to the relay (master switch that turns the N2O on and off, and then throttle micro switch wired inline)
Power out of the relay to the Seleniods.

I've never wired in a MSD RPM Window switch, so not sure where inline you would put it...... It should have wiring directions on/in the box.

Bottle heater just needs a power and ground (run the power threw a lighted rocker switch so you can tell when its on......)




SPD RCR Z - '02 Z24 420whp
SLO GOAT - '04 GTO 305whp
W41 BOI - '78 Buick Opel Isuzu W41 Swap

anyone wanna just install it with me... lol minnesota and ill bring it over

It looks like it's missing a nozzle and both lines from the solenoid to the nozzle



Proud member of Jbody of Kentucky ... Click on sig to go!

like a fogger? and then a line going to the nos cheater and the fuel cheater? if so i have that just was cut out of pic thanks