help with speaker box design - Audio & Electronics Forum
Forum Post / Reply
You must log in before you can post or reply to messages.
OK, I'm working on a project, and I'm hoping someone with extensive box design knowledge might be able to help. It's not for my car.
I'm building wall boxes for a pair of speakers I have, and the problem I'm running into is this: the original box for these speakers is ported. It has a 2" diameter port that is 6" deep. Now I do not have that depth for the new box. I need to either:
A) find out what size sealed enclosure this speaker will perform properly in.
or
B) figure out what size port I can use in the new box.
The current enclosure is 870 cubic inches. The new box will have an interior width of 13"" and a depth of 3.25". Those dimensions can not change. Any one of you audio gurus able to help me out here? I do not have the specs for the components, and I'm not sure if I could possibly get my hands on them, which is why I'm asking for some help.
Thanks in advance!
Forum Post / Reply
You must log in before you can post or reply to messages.
