I got some answers and thanks for that. but i did forget to mention I have no knowledge of car parts or car lingo. so without being all jerkish lol please explain like you would a child on how to take out the factory cd/radio and then as best as possible what i need to do in order to put in a new mp3 ready cd player. thanks again
If you can't understand a few screws, a couple pulls here and a handful of wires then.....
Buy this.
John Lenko wrote:I personally wouldn't let a child touch my car.. but hey...
Try this: http://www.teamforwardmotion.com/tfmtech/j-body/audio/index.php
...j
this was also posted in the other thread in the 3rd response, also your second response had links to the stickies.
Being too lazy to even check the links posted does not make the others a jerk, the first 3 responses were trying to help with a dash of humor thrown in from stephen.
To summarize, jisrock please utilize the search feature, especially when asking a question that has more than obviously been asked before.
This link helped to take out the speed gauge but it doesn't say how to take out the radio!! Only the speed gauge. Help me some one please!!
After you have the speed gauge taken out of the car there should be a molding that goes around the speed gauge and then around the radio and the ac controls.. on the top of that piece there should be like 2 or 3 screws and then one on the left hand side behind the side molding that pops out with a flat head screwdriver? it's quite simple to find them.. and then that should pull right off.. and then you should have 2 screws on the left and 1 on the right of the stereo.. unscrew them.. and then pull the radio out.. unhook the antenna.. and the 2 plugs that connect to them. They might be a little difficult to unhook.. the 2 plugs..
IF you need help before you can remove the gauge then its just popping the side moldings.. like 5 screws .. and then open the glove box get the 2 screws that are deep inside the open slit in the glove box.. and then it should remove.. and that will open up everything to get to the speed gauge...
hope that helps?
-- RK Sport Underdriven Crank, TTR Mounts, 4-1 Header,
Catback Exhaust, Reveco 62mm Throttle Body --
honestly.. that page covers everything though ..
-- RK Sport Underdriven Crank, TTR Mounts, 4-1 Header,
Catback Exhaust, Reveco 62mm Throttle Body --
what? you dont have to take out the cluster....the dash comes out as long as you take the the screws out......no need to remove the "speed gauge" ....
