alarm starter install - Audio & Electronics Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
alarm starter install
Saturday, August 23, 2008 7:31 AM
so i recently bought a compustar 2 way alarm starter combo it has the cm3000m brain in it i've installed these in other cars, but before i decide to spend a whole weekend trying to wire this sucker in i figured i'd see if anyone has the diagrams for the car and wire locations. i have the manual for the car but it doesn't give wire locations.


Don't you bottom out?

- Yes I do

Re: alarm starter install
Saturday, August 23, 2008 3:32 PM
Ignition wires you can access at the steering column. just take the top and bottom column cover off and you will see what you are looking for.

Power door lock wires can be accessed at the Drivers side kick. wire colors i do not remember.

You shouldnt need a tach input. just use the timed output. works fine for me

Trunk release wire i just accessed at the trunk (unless you have an in dash button like some of the newer ones do)

Parking light input can be found on top of the steering column hooked to the light switch. i BELEIVE its a Brown wire.

Here might be something a lil more helpful for you tho.

95-99 Wiring Chart

00-02 Wiring Chart

03-05 Wiring Chart








Re: alarm starter install
Saturday, August 23, 2008 5:35 PM
ok but for the dome light supervision do i have to diode isolate both doorpins?
and i forgot to mention it's a manual. how do i properly bypass the clutch switch while keeping the original safety feature


Don't you bottom out?

- Yes I do
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search