i have 2 amps
2 compressors
10 gal. chrome air tank
2 12" subs
1 capacitor
16" monitor
i wanted to put it all in one cavalier trunk
any decent ideas????
i wanted it to all flow. .. . . but i didnt expect to get such a big air tank....
could we get brand names, dims and all that on every thing? maybe pics? and any samples of something you seen and liked?
click sig for my car audio videos
Just going on what you've given me, it's gonna be difficult. We need the specs of your sub i.e. Air space. Do you want a sealed box? Ported? How much ventilation do your compressors need? How BIG is your ten gallon air tank? On a first guess, I'd say it won't all fit Unless you want to lid mount your monitor. With actuators. Or Servos. And lots of money.
I'd say fiberglass. And MDF boxes for your subs.
There's a thin line to be crossed, when the upgrades to your vehicle increase your chance to get tickets by an amount exponential enough to stop worrying and build the fastest, loudest car you can.
i have 2 air tanks in the trunk of my car 1 5 gallon mounted by the back seat on the floor and 1 6 gallon tank hanging below the rear speakers and both my compressor on each side of the 5 gallon tank , i also have a 16 monitor on my trunk lid, now u can make a fiber glass box in the corners but will be pretty hard to get good air space since u gotta watch that when u close the trunk the trunk arms dont hit the box, now i'm only going with a 10" sub this way i still have trunk room. now for the amps i would mount them in the spare tire well its the only place to put than so u dont make ur trunk look so packed. and the cap can go there as well if there is room if not put it on the side in the drivers rear quater area behind the carpet. hope this gives u an idea
yea im thinking thats what im gonna do.... i think im gonna move down to a 5 gal. or maybe a short but fat 8 gal.
i was thinking putting my two subs right behind the rear seat facing the rear with the capacitor in between them. then taking the tank and putting it in the spare tire well, and making a plexiglass bridge on top of the tank and putting the compressors hovering over the tank.... and just get one 1200 watt amp instead of two small ones.... and putting it in the driver side slot towards the back, and the battery where phewes has it but farther back......
does any of that sound like it could work??
im not smart with this stuff at all..
