so i installed some underglow the other day and i directly connected it to the battery and all the sudden i got out of my car and ti shut off and wont turn back on. could i have blown the fuse or somthing?
im using the neg terminal for ground its connected
Is there a fuse on your wire to the tubes at all? Did you check all the connections? Every single one?
yeah theres a fuse on the power cable and i checked the connections its brand new tho how could i blow the fuse
Check the fuse, doesn't matter if it is brand new.
Factory default. Scraped up the wire putting it in. I'm not questioning your abilities. Its just the nature of installing. Stuff gets effed up.
Get a test light and test at the tubes to see if they're getting voltage. If not I would check the entire wire run from front to back. If all else fails get a 12 v battery or charger and test each tube individually and if they work trace the wires back. Also try grounding to the chassis. Idk how safe it is to ground directly to the battery. I couldnever get a good ground off my battery anyways.
First you should check the fuse.
If the fuse is good then check your wiring. Make sure your connections are secure and that you don't have something causing a short.
If that's not the problem then you have something more major happening.
what brand did u use? because in my experience some are ridiculously touchy on how u wire them, to an extreme (Eurolite ftl)
