Cole's Notes:
-Have some aftermarket speakers/deck in my car that I ran directly to a separate amplifier
-Putting that system in my new car
-Putting stock monsoon deck back in with different set of aftermarket speakers

Did some research and found out what all the wires do:

Front right
Light green - Right Front Tweeter Output (+)
Purple - Right Front Tweeter Output (-)
Dark green - Right Front Midrange Output (+)
Orange - Right Front Midrange Output (-)

Front left
Black - Left Front Tweeter Output (+)
Yellow - Left Front Tweeter Output (-)
Dark blue - Left Front Midrange Output (+)
Light blue - Left Front Midrange Output (-)

Rear right
White - Right Rear Tweeter Output (+)
Yellow - Right Rear Tweeter Output (-)
Dark green - Right Subwoofer Output (+)
Light blue/black - Right Subwoofer Output (-)

Rear left
Red - Left Rear Tweeter Output (+)
Purple - Left Rear Tweeter Output (-)
Dark blue/white - Left Subwoofer Output (+)
Light green/black - Left Subwoofer Output (-)


Now, heres my question....

For REAR RIGHT (as one of the four speakers for example), can I splice the White and Dark Green to positive on my speaker and splice the Yellow and Light blue/black to the negative?

If not, what would be the best way to wire my speakers in? I have no connector ends...just snipped wires

Thanks in advance





BUY MY SAAB TURBO SETUP! --> http://www.j-body.org/classifieds/detail/61091/

you can but not really. you kind of need a crossover


or the better option is to wire the tweeter wires directly to the tweeters on your speakers themselves. thats what i did but not all speakers allow for that



My car may run 18s, but I can do your taxes in 10 seconds flat.
JBO lube - they would never have enough in stock and we'd never see RodimusPrime again