Maybe someone could help me out. My driver side popper just quit working when I press my keypad. I have an emergency button under the car,that when I press the door popper works,but when I press my keypad it does nothing but I can hear a click inside the module under the dash. It's like it's not sending a signal to the popper. Anyone have an idea what it could be before I fork out $200 for a new kit. Thanks

Anyone can help?? Trying to get this fixed so the car can finally go to the body shop

Why haven't you started tracing wires and testing continuity? If the module clicks but the Popper doesn't work, there could simply be a broken wire going to the Popper.

(tabs) wrote:

z yaaaa wrote:its not much fun trying to argue with a wall.

oh, trust us, we know

I traced the wires back to the module and didn't see nothing loose but i didn't test any of the wires yet, I'll have to get a tester and try that..

I acually just replaced my alarm module because I had the same problem. I have the compustar cm3000. When the signal to my popper stopped working so did my remote start. My relays and everything else where good and I tested the alarm and it was infanct not sending the ground pulse. The relay in the modual clicked when it was pressed as well. I just figured from the repeted use of the aux function I burnt out something in the modual because I could still arm the alarm and pop the truck and some other functions. I also use the car as a daily driver so it gets alot of use. I called a few retailers untill I found a replacement modual for 75$ + tax (I'm in Canada). It was plug and play I just had to set the tach sensor and link up the remote.