so i got my alarm system working but as far as the starter kill relay its a different story. the car starts up then stops which is why im sure its the starter kill. can anyone help with the wiring on this?

Wouldn't the starter kill stop the starter from working?

Are you starting the car with your key, or remote start?


- Your not-so-local, untrained, uncertified, backyard mechanic. But my @!#$ runs

starting with key and thats what i thought but ive checked all my wires too. its a viper 3105 1 way alarm system

If the engine starts, then dies.. it's your Passlock. Are you using a bypass module?

John is correct!



PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO

im not using a bypass kit so is that something necessary for the alarm install?

yea, you have to use a bypass kit. http://www.bulldogsecurity.com will tell you what you need. I had some issues with the 1997 cavalier model year. I had 3 I could not get a bypass to work on. Passlock would keep disabling the car. I did about 10 other years between 95-05 and never had an issue. Just wanted to let you know this as I do not know what year you have. Some manufactures have a list of black listed cars and 1997 is one of them for some reason.


<img src="http://www.v6z24.com/jbodyforum/images/signatures/cavalier3400z.jpg" width="319" height="199"/>