ok so ive got this amp Clicky here for amp info


and this sub.

Click here for sub specs

And i was wondering what i can do to get the most power to the sub?

Would i run one plus from one channel and one neg from the other channel. to one side of the Sub. Then run each of them to the positives and negs on the other side of the sub?

So itd go
channel 1 + to Voice coil 1 + to Voice coil 2 +
channel 2 - to Voice coil 1 - to Voice coil 2 -

is that the correct way of getting the 800 watts outta the amp. and the most power to the sub?


____________________
84 Fiero

the way i understand is that amp can handle the 1 ohm so wire it like that, . use the positive from the left channel and the negative from the right

Specs say 2ohm max, so you'll need to wire this for 4ohms.

Bridge the amp.
AMP- to VC1-
VC1+ to VC2-
VC2+ to AMP+


09 HHR LS, Wife's Car
05 Cavalier, Clarion DXZ375MP, Autotek MM8000.5 & 13Kv.2, wife's old car, updates coming soon

Arite cool. Thats how i meant to say it. wow i actually no something about this stuff finally! lol thanks man


____________________
84 Fiero

i meant this previous post for Fantaz..


____________________
84 Fiero

Brian Stafford wrote:Specs say 2ohm max, so you'll need to wire this for 4ohms.

Bridge the amp.
AMP- to VC1-
VC1+ to VC2-
VC2+ to AMP+

So do i run it off both channels then? like this?




____________________
84 Fiero

yeah my bad the next page has detailed info, 4 ohms it is

J K (84_Fiero) wrote:So do i run it off both channels then? like this?

Yes, but make sure you hook it up in bridged mode.

Left Channel + Right Channel -


09 HHR LS, Wife's Car
05 Cavalier, Clarion DXZ375MP, Autotek MM8000.5 & 13Kv.2, wife's old car, updates coming soon