its a turbontectics and its 18 Tall x23 Long x4 thick
U guys think this will fit...im getting it for free....
you scratch my ride IMA EAT YO CHILDREN
Ummm I wouldnt think the 18" tall part of it will work lol. If you meant to type 8" that would be better obviously.. But no, not 18 tall.
For instance, my intercooler is gonna be 24L"x9H"x3W". Good for 800 hp.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
take it.....sell it get a smaller one......problem solved
Thanx Charles
take it.....sell it get a smaller one......problem solved
x2
Play hard, Drive fast, and Be safe...
its not gonna hurt anything ....itll just be huge lol....im probly gonna custom mount it....so when i turbo upgrade itll still have penty of air goin to it lmao
you scratch my ride IMA EAT YO CHILDREN
actaully it can hurt...there is such thing as to big
but i dont see how it would hurt i mean its not pushing air into the turbo......the turbo pulls air from it...so u figure the more air the turbo has to pull the colder the turbo stays......and the colder it stays the longer it lasts
you scratch my ride IMA EAT YO CHILDREN
you obviously don't know how an intercooler works.
the turbo doesn't pull air from it.
let me explain here
1. a turbo charger is like a air compressor. the turbine spins from exhaust gasses which in turn, spins the compressor, PUSHING air into the engine. PSI is a term relative to resistance.
2. when air is compressed it heats up, this heat is damaging to the engine thus an intercooler should be used.
3. the intercooler is placed after the compressor, so it cools the compressed air.. having a to big intercooler will cause a loss of flow, which in turn hurts power. Its also known as a pressure drop just because PSI is a term relative to resistance
ok thnx for clearing that up
you scratch my ride IMA EAT YO CHILDREN
That thing will
not fit no matter what you do. My IC is 10" and i had to cut most of the steel bumper in order to fit it, another 8" on top of that would be sticking up over the hood of the car.
Heres a pic of a 10" tall intercooler, good luck fitting one much taller......
Edited 1 time(s). Last edited Thursday, October 26, 2006 5:45 PM
- 93 mph in the 1/8 mile
Member of J-Body Of Michigan.
i was gonna ask u what size urs was lol.....im just gonna sell it when i get it......ill test fit it first just to see what would have to be done....
you scratch my ride IMA EAT YO CHILDREN
wat are ur dimensions skills.....10 tall x ? x ?
you scratch my ride IMA EAT YO CHILDREN
yea too big is just overkill. I hate when I see like a .42 trim turbo running like 4 lbs with an intercooler so big it is covered partly by the bumper. It's nonsense. Like Volume King said just take it and sell it.
Cavgold96 wrote:wat are ur dimensions skills.....10 tall x ? x ?
Not exactly sure off the top of my head, i'd go outside to measure but its pouring rain right now.
- 93 mph in the 1/8 mile
Member of J-Body Of Michigan.
25" X 10.5" X 3" including the end tanks.
That is the size of intercooler used in Mackleer's kit, and pretty close to what Jeremy's is
Jason
99 Z24
157hp/171tq
wheres my boost??
ok thanx guys.....im told this intercooler is worth 300.....so im gonna try to sell it for that.....
just a thought....theres no way to custom shorten a intercooler...like i i were to cut 8 off the top and reweld the top back on?....cause i dont wanna deal with shipping this out...but if i have to i will
you scratch my ride IMA EAT YO CHILDREN
you can have that done. it actualy used to be a pretty common practice before cheap aftermarket intercooler were available. people would buy ones for big trucks and cut them down. the trick is finding someone who is willing to do it.
99 Turbo Sunfire GT | Ram 2500 | International Rollback | Mr Hanky the Suburban
i can do it my self ......table saw....i just cut off the sides of the outter cover and peel off the whole top part and then re weld it on the top of the freshly cut part right
you scratch my ride IMA EAT YO CHILDREN
i also have a front mount from a saab... i can practice on it.....its one of the tall skinny front mounts...
you scratch my ride IMA EAT YO CHILDREN
I know im in the wrong place for this probably, but I gotta Beretta and im trying to size up an intercooler for my 2.2 setup. I know it's not a J-Body, but does could anybody give me a guess at what size i maybe
looking at?
Cavgold96 wrote:ok thanx guys.....im told this intercooler is worth 300.....so im gonna try to sell it for that.....
just a thought....theres no way to custom shorten a intercooler...like i i were to cut 8 off the top and reweld the top back on?....cause i dont wanna deal with shipping this out...but if i have to i will
it would be easier to ship it out, then to bother trying to reweld it...and possibly mess it up bad
