where did everyone get their oil feed and return lines, i dont want some POS lines, but i dont want to have to piece together a kit, unless someone posts the part # along with their post. I have done extensive searching on this and have found nothing, so please help me out. any help will be greatly appreciated.

if you need them right away, go to a local farm shop and get steel braided line at the lengths you need. They will make them for you, and you can watch... pretty neat. as for oil return, something like a 3/4" multi purpose works if they don't have steel braided... look at spending 50 USD at the store and going home knowing you have lengths you measured, and the right fittings


HP Tuners | Garrett T3/T04B | 2.5" Charge Pipes | 2.5" Downpipe | 650 Injectors | HO Manifold | Addco front/rear | Motor Mounts | HKS SSQV | Spec stage 3 | AEM UEGO Wideband | Team Green LSD | FMIC | 2.3 cams | 2.3 oil pump swap | 280WHP | Now ECOTECED

Also I recommend one of the Function 7 oil inlet flanges for the feed to restrict the oil and pressure.


~Boost. Its what's for dinner!~

thanks for the responses, i think i might do that. what type of farm store are you talking about?

any type of farm machinery store, look for something like "farm supply" or anything with the word "bearing" in the title


HP Tuners | Garrett T3/T04B | 2.5" Charge Pipes | 2.5" Downpipe | 650 Injectors | HO Manifold | Addco front/rear | Motor Mounts | HKS SSQV | Spec stage 3 | AEM UEGO Wideband | Team Green LSD | FMIC | 2.3 cams | 2.3 oil pump swap | 280WHP | Now ECOTECED

Look for a place called Tompkins industries they do custom braided lines while you wait and it is cheap. Maybe this post I made awhile back might help you.
http://www.j-body.org/forums/read.php?f=40&i=124888&t=124125#124888


FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!

yea, theres no tomkins around here. i think that maybe a local tractor store would be able to make them. theres on a few miles from my work(sence i live out in the country). what fittings should i use?

i run a -4AN on the feed with the function 7 restrictor and a -10AN on the return.


~Boost. Its what's for dinner!~

thanks, would 5/32" vacuum line be good for my vacuum lines, or should i go with a different size?

i used vaccum lines from fuel lines...Ive also heard of people using lines from windshield washer...any auto store has specific application lines....


you scratch my ride IMA EAT YO CHILDREN