r the injectors on the 2.4 saturated or peak and hold? i didnt find much about them. im guna b runnin 10psi at break in and up to 25 after i got the boost controller. would the red tops or green tops b better for 10 psi.
98 older low ohm , and 99 up high ohm
so i take it low ohm is saturated and hi ohm is peak and hold?
thanks alot for that little injector info, it helped out.
I'd deff get the ford green tops which are 42lb and 440cc's. Im running 10psi on the gm charger and im at around 85% duty cycle with the cobalt ss 36lb 370cc injectors which are actually about 350cc's cause they are overrated.
alrite cool. thanx. im runnin 10psi via internal wastegate and ill b stayin at that for a while to i get a boost comtroller and a few other minor parts. but i kno the stock LD9 injectors would not due. also how bout hi flow in tank fuel pump. i beleive the walbro 255 will fit but im not sure and i havent really found much else other than out tank.
