Ok here's the deal everyone !!!
i'm about to get my car out from storage and I bought a gm supercharger to install. I want to know everything I would need for it to work properly on my 1997 2.4 cavalier !
What I already have :
- fuel pump 255 walbro
- fuel pressure regulator
- fuel management unit 8:1
What I already intend to get:
- hp tuner
- rc 320 injectors
- wideband o2 sensor
And a another question how much time would take a prto to tune my pcm after everything is installed ?
tell me what 'm missing please everyone !
if you are going with HPT, then the FMU is not needed... tuning takes a couple runs, with a good wideband and HPT, you can get it super close in a couple runs.
check out the FAQ's in tuning, shifted has some good info on "faking a 2 bar tune" and "installing a GM s/c on pre 99 2.4's.
HP Tuners | Garrett T3/T04B | 2.5" Charge Pipes | 2.5" Downpipe | 650 Injectors | HO Manifold | Addco front/rear | Motor Mounts | HKS SSQV | Spec stage 3 | AEM UEGO Wideband | Team Green LSD | FMIC | 2.3 cams | 2.3 oil pump swap | 280WHP | Now ECOTECED
