hey whats up fellas i was just sitting here and noticing theres ABSOLUTLY no picsof passanger side Intercooler pipping. i just wanna see if u guys have done the same thing as me, or if possible a better idea. i have taken off my passanger side wheel and well and there a pretty big pieace of plactic in there next to a wiring harness. i have cut a hole in there to route the intercooler pipping. i just wanted to see if neone has some pics of theres i could see for an example. ; ]
gimme some input/pics of the passanger side intercooler route
Thanks a bunch
Here is the best pic I have of mine, we sneeked the piping up under the front on the passenger side, there wasnt any room like you said so this is what we came up with.. It still sits higher than my auto tranny pan does, which is good.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
ok thanks alot, also did u have to cut the bumber support out a bit? im using a smaller intercooler like 25X6X2 1/2, so i shouldnt have to cut... where i cut my hole for intercooler route on that passanger side is right behind the fender/Wheel well in that plastic it goes out under all the Serpintine belt. "if thats hows u spell it".. neways thanks for the pic Whitecavy. i'll be posting some pics sometime soon to show everyone where my progress is.
Thanks
here is mine.. i hope this helps you..
-- MyZcar
I have mine setup kinda like MyZcar. I have a 180 and removed the horn and then there was like a flap that I lifted up and its just enough for the pipe to fit in there. Then I followed the curve to the engine and ran it between the engine and motor mount and then up to the turbo. I don't have any pictures because my disposable build camera is missing...
~Boost. Its what's for dinner!~
on this last pic mr.pute is that behind the fender/wheel well? right next to that wiring harness? if so thats where i have cut my hole aswell i liked the idea and it was only cutting plastic so it wasint very hard, my hole is more towards the flap u flip open when u take those screw's outta the wheel well.. ight thanks alot for all who put the pics they had on.
XpLiciTCaVi wrote:on this last pic mr.pute is that behind the fender/wheel well?
Correct.
I will NEVER change my sig. HTML 4 EVA!!
<a href="http://www.j-body.org/members/mrpute"><img src="http://www.j-bom.com/images/sigs/putesig.jpg">
