I was want to some advice from the valley of knowledge.

I have a 2.2 ecotec
eagle crank
eagle rods
and wiesco 8.9 pistons
eagle studs
and turbo with the hahn 16g
ok I want to turn it up to 18 psi
what size injectors should I be look into?

I am getting the head down and hope to be up around 22 next summer so if there is some that would work fine for both then that would be great. I trying not to upgrade twice within in a year but if I have to I will.

thanks guys

Did you read the new boost faq? It goes through ALL the calculations in there to size your injectors correctly.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

This is the best I can do to answer your ? It came from the sticky above that Shifted mentioned.
http://www.rceng.com/technical.aspx



Edited 1 time(s). Last edited Thursday, September 06, 2007 11:04 AM


FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!

For the record, 15-16psi with 48lb/hr injectors, FMU "tuned" 8:1 disc in fmu. T3/T4 57 trim turbo.


---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!