I have a Mitsu TD04 (from a Volvo 960Ti), and I'm tryin to find out what flanges are compatible so I know what manifolds to be on the look-out for. I found one that has a T3 turbo flange, and the flange looks the same (from what I can remember.. its rainin outside, and I dont wanna rough it out there), but according to Ask.com, they're not the same. Can someone confirm this?
R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Mitsu flange
T3 flange
Not quite the same. You'll want a manifold with the mitsu flange to use a mitsu turbo.
_________________________________________
450WHP Turbo Ecotec swap in the works...
Honestly, it's probably going to have to be a custom job, either that or you'll need to get a different turbo with a T3 flange. Every manifold I've seen for the Ecotec (or even the LD9 for that matter) has the T3 flange on it.
_________________________________________
450WHP Turbo Ecotec swap in the works...
or find a t3 exhaust housing for the turbo...talk to hahn, they use mitsu turbo's with t3 housings
I got my turbo slightly used off of ebay. It's a Mitsubishi 16g with a T3 style exhaust housing. It came from a Chill Factory turbo kit for a dodge neon.
Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!
on that note, I got a Mitsu TD04 for sale 