i ahve a 98 sunfire gt 2.4 i was wondering if the injectors are low resistance or not i am looking for 450 injectors out of a talon are they low resitance or not
so i have to run a resistor box
dont get the right injectors
wehat injectors do i ge tthen
your injectors are low impedance, if the dsm injectors are low impedance they will work but might just need to change the clip
they have a stock resistor box in the ecu to make them low
what r the 2.2 ecotec are they high or low and what about the 2.0 sc will they work on a 2.2 eco
johnathon strickland wrote:what r the 2.2 ecotec are they high or low and what about the 2.0 sc will they work on a 2.2 eco
yes they will and will connect to your stock injector harness
will they be ok for 8 psi thank you for the info
johnathon strickland wrote:will they be ok for 8 psi thank you for the info
450cc injectors will be good to about 350whp so yea they will be good for 8psi... unless you had some crazy agresive tune ahah
The First Twin Charged jbody
blue car (R.I.P) - 240whp @7psi..
silver car - 305whp 315lbs.tq @15psi (91 Octane) or 420whp & 425lbs.TQ @20psi (94 octane+Alcohol Injection)
All dynos run on a Mustang dyno
get for brown top injectors there about $40 - $50 refurbished on ebay those will be good for you they will clip right in all the other injectors wont work because they are high impeedence
