does any on know were can i hook a oil feed line t25 t28 TURBO on a 2.2 ecotec
search
there are several places on the rear of the head and in block
were would be the best and can i put the return to the vale cover
[quote=97cavie24ls(™)]search
there are several places on the rear of the head and in block
i have searched too but there are several ports you can tap into back there and wondered which ones were best too. also anyone know what size fitting goes into the block as well? mine needs to be a -4 fitting on the one end.
im wondering what size the fitting will be for the side of the head is myself
Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla
can you run a return to the valve cover?
horsepower is the force that determines at what speed you hit the wall, torque is the force that determines how far you take the wall with you after you hit it.
on the oil return you should have it lower than the turbo so gravity can put the oil back in the pan. I have never seen anybody run the return to a valve cover.
We carry the fitting to tap into the factory holes in the back of the block. We ordered a few of them a week or two ago and they just came in. It converts a Metric 12x1.75 bolt thread into a female 1/8NPT fitting. Then you can run a 1/8NPT male to -4AN fitting or whatever size you require.
i've seen a oil return to the valve cover on a honda civic. that thing was riggggged.
