Hey guys my 2.3/2.4 turbo hybrid will be finished soon now that tax time is here, anyway when I first fire the engine I'm thinking I should do it with the stock injectors and the intercooler piping disconnected so the engine isn't seeing any boost. My thinking is that I don't want to wash the cylinder walls down during break in with the 1000cc injectors and no tune. Then once the engine is broken in put in the 1000's and load my HPT pro and tune for the larger injectors, is my thinking correct here?

well just starting the car, i would hope it wouldnt make boost....

If you have the ability to tune I would go ahead with the 1000cc injectors. If you set the constant up right it should not be getting excessive extra fuel while idling. I would also leave the charge pipes hooked up. If you are driving normal you won't see boost. Also not a bad thing for the motor to see some boost, just keep it turned down.



FU Tuning

Start it on a stock tune, stock injectors. If you have new cams do a proper cam break in.

I drove 500 miles making 1-2 psi on a stock tune with stock injectors, high load low RPM to help seat the rings...

I wouldn't risk washing the cylinder walls trying to "figure out" what the injector constant for 1000cc injectors is.

-Chris-



-Sweetness-
-Turbocharged-
Slowly but surely may some day win this race...