I have a strange problem with my m45... it ran fine for a few days after i flashed it and now i cant figure it out.
When my car goes into boost(passes 0 psi vac on gauge) It bogs down. I cant explain it. Its not even a bog down. The car simply does not respond. Almost like a clogged cat.
AFR's are good, all vac lines, everything is connected properly. I changed the Ignition Coil housing(was misfiring at idle, that fixed it).
Anyone got any ideas? Could the intake manifold not sealing properly cause this? i sprayed some carb cleaner between intake manifold and engine didn't seem to be any leaks.
So car drivers fine, as long as not in boost.
if anyone have some input please tell me, its pretty big problem.
TPS?
Get a laser temp gun and see if it is cloged.......
Chris
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
could be the plugs i had an issue like that with my swap turned out to be the plugs and wires but the wires wont be an issue for your
JBO since July 30, 2001
