hey guys i was wondering if anyone had any pics of their return line running a atomic fabrications shorty turbo manifold. i bought this mani and where my return line goes on my turbo i would have to run the line right between the manifold runners (obvi not a good idea) and i really wanna keep the bends to a minimum for obvious reasons. im just having major issues trying to figure out how this is supposed to be setup with this manifold. i will try and post pics if anyone doesnt know what im talking about. thanks

We have done both through the runners or used a short radius 90 for oil return lines. We haven't had any issues with with either method so far. We always use stainless braided line for oil returns, No smaller than -10 line and heat wrap when we go through the runners.

It is tight for oil return down there, but its nature of the beast with running top mount turbo manifolds. If your still having clearance issues we can hook you up with one of the oil return lines out of our turbo kit.



Atomic Fabrications
Full race and street car fabrication shop.
www.AtomicFabrications.com

i would love to buy a return line from you. let me know how much and i would be all over it