I was wondering if anyone could tell me if you can use BOSCH style injector's on a DELPHI style injector system? I was wondering if it is just a matter of clip's or doe's it have to do with the PCM? the fuel rails in 96-02 2.4L are the same correct?


Friends Don't Let Friends Drive Stock!!!!!

Which injectors are you asking about specifically?





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Well I have the Accel 30LB. (310cc) high impedance Injector's, but there Bosch style like the 96-99 (2.4L)? I'm trying to find some suitable injector's for my supercharger kit that I'm piecing together,I already have the proper RC engineering 440cc injector's but I know they won't work well until I get the HP tuner's software to properly tune with them.


Friends Don't Let Friends Drive Stock!!!!!

either set your gonna have to cut the plugs , and put new 1's in

So its just a matter of buying the plugs, cutting old one's off and wiring on the new ones,................is there a certain procedure to do this?


Friends Don't Let Friends Drive Stock!!!!!

cut and spilce

Thats what I was hoping to hear, now will the RC engineering clips work with anything other then the RC Engineering injector's?


Friends Don't Let Friends Drive Stock!!!!!

they are all standard for the 98-older style

RC Eng injectors are Bosch style IIRC as are the Accel. I had to cut off the stock plugs and solder on some new ones when I installed my turbo kit. Took us like 10 minutes to do.



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26

Team Vision Racing (aka hypsy) wrote:RC Eng injectors are Bosch style IIRC as are the Accel. I had to cut off the stock plugs and solder on some new ones when I installed my turbo kit. Took us like 10 minutes to do.

Does it matter which wire goes where in the new plug for the injector?

make sure you soldier and dont crimp, and use heat shrink. If the injector harness is setup like all the other one's I've seen, there'll be one wire thats common to all the injectors and 4 wires that go to the individual ones (and obviously need to go to the right ones).


1994 Saturn SL2 Home Coming Edition: backup car
2002 Chevy Cavalier LS Sport Coupe: In a Junk Yard
1995 Mazda Miata R-package Class=STR
Sponsored by: Kronos Performance

WPI Class of '12 Mechanical Engineering
WPI SAE Risk and Sustainability Management Officer