i have a 97 sunfire with a supercharger, 36lb injectors and i ran out of i need 42lb low impedance injectors. Green tops are high impedance, my friend has a set of 450 injectors from a turbo talon can i use these? If not where can I get a set?

they are peak and hold but you'd have to test fit the to see if they size up...



ʇı ɹǝʍo7 | ǝcoMonstǝrs

Ive tried the turbo talon stock injectors before on my quad. They would not work becuase the talon injectors are missing the notches where you would put the retaining clips on the injector body. Without these clips, they could not be fastened to the fuel rail. Fuel pressure would be free to push these injectors right out of the fuel rail.

Try going to www.diyautotune.com and looking at their injector selection. They have GM Delphi injectors that look just like your stockers but are all different flow rates and impedances. They should have anything you want for about 200.00 'ish. I have a set of the 75lbs/hr from this place and was very satisfied with 'em.



M90'd Built LGO-15 PSI
http://webstarts.com/quadper4mance

i have a set of new ford 42 lb low imp. i was gonna use on my 95 2.2 turbo build

80 shipped pm me if interested

thanks
jason