Got my saab intercooler piping done tonight.
c/c welcome
Thanks
jason
Did you just use an ebay charge pipe setup?
No the piping was from verocious motorsports as well as the couplers and t-bolt clamps.
Dont know why no one sells a intercooler piping kit for the eco it was pretty easy and I was thinkin about sellin them after going premium but not everyones intercooler will lsnd the inlet at the same spot.
easier than i thought though!!
jason
I think why no ones sells a kit for the Eco or any J really is there is no real kits for them other than Hahn and Hahn sells a piping kit for there turbo kits.
FU Tuning
Looks good...
Are you going to weld those joints instead of the couplers??
eventually yes but for now needed to get it together to tune the car.
thanks
jason
Could you post up what bends and amount of them your ordered?
Little old of a thread but if you need me to tell you, please pm me and I will.
Thanks
Nice I like the support bolt you put in it.
You mean the rivet that holds it to the subframe? lol I didn't want it hitting my nice wheels!!
Posting the bends on the topic would be a good idea for people interested in doing the setup in the future
Yeah if you cold post those up it would be great. I got a saab setup and I wanna install a intercooler on it also. Thanks!!
For the Saab set up
I used 2.5 inch piping for the intercooler.
Off the turbo you will need a 90 degree coupler 1 end will be 1 3/4 the other will be 2 1/2
you will need 2 90 degree pipe bends 1 for off the turbo and 1 to join to the intercooler
you will need 2 straight 2.5 inch couplers
you will need 1 90 degree coupler for the intercooler to last pipe.
And these tubes will need to be cut to certain lenghts to fit right depending on your intercooler outlet.
got bigger pics?
04 Cav. 2dr. 5spd. My DD. 'Nuff said.
Ummm..... not sure will have to check, posted this almost a year ago will have to see if I have the originals still around.
