i just bought a greddy turbo timer, im wondering if anyone could shine some light how to install it. i have a 2003 pontiac sunfire ecotec. there is a three wire connector coming off of the ignition right near the key and i believe there is also more wires coming on the other side of the column. i was focused on the three wire connector but am not sure. one wire was ground. one wire was ignition. and one wire was constant 6 volts. im not quite sure if im doing this right at all or not. any help is appreciated. thank you
running rich? turn the boost up
fail, searched google but not specifically on here. my apology's. but thanks!
running rich? turn the boost up
the 12volt.com it will show you all wire colors and functions as long as you have the manual to the controller youll be in for a easy install!
the link posted is better than 12 volt will ever do...
did you even click it?
Ya I guess a step by step helps no I didn't look now i know! lol
Buy the Turbo timer adapter specifically for your vehicle. Makes install 1000x easier
If the make one for cavaliers im not sure but they should just look on ebay.
hunter mulhollon wrote:Buy the Turbo timer adapter specifically for your vehicle. Makes install 1000x easier
If the make one for cavaliers im not sure but they should just look on ebay.
they dont. has to be wired in using the link i posted.
Oh my bad. turbo timers i have installed had the harness and was fairly simple
that how to looked a little complex and hard to see which wires, i simply unplugged the harness right fro my ignition and did it there, pulled out about 4 inches, very simple. took about 20 minutes to have it wired up. and 5 minutes figuring out how to work it
running rich? turn the boost up
