if you have a safc and keep throwing a map sensor low input code. i have came across a way to fix it. all you need is a 2 amp diode and you splice it in between the green wire that you cut and split the safc input and output wires to. the diode is similiar to the resister but it allows current to flow only one way . so you take the band side of the diode and it goes towards the computer of the car and the other side to the sensor. this is just like keeping the green wire hooked up at all times but really its not and your safc still controls the fuel map.
are you setting your safc sa 5 v in and out? because ive never thrown a code with mine. i know rocky had a write up and it said 5v in and 00 out but that made the car idle and run lie garbage. its gotta be 5 in and 5 out.
parting out my built and boosted 97 z24 so4x4.com/cavy.html for pics and a parts list
picked up a bung today
parting out my built and boosted 97 z24 so4x4.com/cavy.html for pics and a parts list
the safc i have is the version 2 which is all black and i dont think there is a setting on mine. if there is a setting then i guess i learn something new
I am running 5 in 5 out as well and I have soldered the 330 ohm resistor between the 2 wires on the MAP sensor I think the grey and the green and no problem since I 1st put it on like 2 weeks.
I just threw a CEL tonight but it is just the basic Low Treshold like always.
Best time:"""11.946""" @ 114.73 mph @17psi 1.83--60"
11 second daily driver!!!!
Race Related 727-561-9440
Shop of choice for your 11 second J body!
Also, built bottom end and or top end LSJ and L61's available.
13's
----12's
----11's
----10's
sorry i replied to the wrong thread with the bung. ive got no resistor and ive had this in since i think around october ad ive had no issues with it what so ever. what year cars do you guys have? maybe its a 99 and up thing? mines a 97 and yeah, not a single issue with it
parting out my built and boosted 97 z24 so4x4.com/cavy.html for pics and a parts list
or, maybe you have the wires in backwards? just a thought. go to the sensor check thing and make sure at wot your getting like 4.7 or 4.8 volts from the map
parting out my built and boosted 97 z24 so4x4.com/cavy.html for pics and a parts list
i have an ecotec and i tried the resistor trick and it gave me a high input voltge
