Well ok, as you can see i went turbo! Yay, well anyway so i'm having a few problems (as you can also see) First its a Cav Connection T3 super 60 with a Vortech FMU, its only set at 5 PSI, but on my boost gauge it only says i'm pulling 3 at WOT. Also, my A/F gauge is usually pretty good, the FMU seems to work fine, but all the sudden it started freaking out and lighting up all the LEDS up to the level i'm running. Also, the BOV is going off when im running 10 VAC!? normal vac is about 15-20 by the way. So that worries me like hell cause my fuel pressure is at normal when that happens, like 35-40 PSI, at full boost WOT it jumps to like 60. Hope to hell its not really pulling boost. So im a little confused and worried, not sure if my injectors are crapping out, or if my plugs are fouled, or what. Any help would be appreciated, please please please help me out here...

what A/F ratio gauge are you using? are you using a wideband? if not... don't rely on that to help you. pull your plugs and take a gander at them.




I was a retard, and now I'm permanently banned.