I know from 2000-2002 the 2200 got the Getrag tranny, but is the tranny behind the 2.4 a Getrag? Because I phoned a wrecker the other day and they said they had one out of a 2001 Sunfire GT and when I asked if it was a Getrag they said it was an OPEL or OPAL something stupid like that
Yes.. all 2000-05 5 speeds are getrag transmissions. The gearing and bellhousing are different between the 2.4 and 2.2 tho. and eco.
<a href="http://www.lenkorules.com/"><img src="http://s93165229.onlinehome.us/images/misc/redsig.jpg"></a>
So I'm assuming the CV shafts would also be different from the 2.4 to 2.2?
Life should NOT be a journey to the grave with intention of arriving safely in a well
presevered body, but rather to slide in sideway with a cigar in one hand,
a rye & coke in the other -
Screaming What A F*cking Ride
cv shafts are the same from 95-05 for all motors , on the drivers side
the 95-97 passenger side has a bracket that bolts to the block , for the axle , but you can swap out the 98-05 on the others
and the trans make doesnt matter
So that means I can use DSS axles on my 2K Z24? Hmm....
O noes!
I've seen getrag axles (00-05) and they all look the same to me... 2.4L, 2.2L, Eco.. the older 2.2L (pushrod) on the isuzus are considerably smaller on the ends than the 2.4L isuzu ones... at least, the ones in the wrecking yard they were. I used axles off a 2004 ecotec on mine, but popped off the ABS ring that is on the end of it.
<a href="http://www.lenkorules.com/"><img src="http://s93165229.onlinehome.us/images/misc/redsig.jpg"></a>