Alright here we go again. Just got the car back from the tranny shop. Had a bully stage 2 clutch installed but the pressure on the petal is so little my 3 yr old could press the petal in. Is there a way to firm up the petal pressure? Once again any help would be appreciated. Thanks guys

itll firm up as you break it in.


2004 Cavalier, 2.2L Ecotec
1965 El Camino, 396 BBC, 14:1, 800 BHP

if all of the air isnt out of the line (quite possible) you can pin the clutch pedal down over night and the next morning all of the air will be out of it and it should be stiff.... i've had it many times when you bleed a hyd. clutch setup you cannot get all the air out so either pumping the pedal for 30min straight or pushing the clutch down and blocking it there over night does the trick


_______________________
** Flat Broke Racing Inc.**

Thanks again I will try the petal trick tonight. Thanks

I'm actually going to try that as well, I've have my bully stage2 in for almost 2 years now, and it's never been as stiff as stock.


15.3 @ 89.97mph, 14's on the way?