My new engine has eagle H beams, JE pistons 9.0.1 compression and GM SC with alky, roughly 10-11 PSI. I have two clucthes, a Spec and a Centerforce. The spec is a stage one and the centerforce I am not sure, I was told stage two but how do I know?

Is there any way to know what stage it is?

Also would a stage 5 spec be too much?

Thanks
Chris



http://members.cardomain.com/vertz24 1998 Z24 Convertible

Yeah Stage V would be to much stage 3 should be all you really need even stage 2 if you look at the spec for the clutch then you should know what you need.

I went with SPEC just for the fact that i did some research not only for the J-body and i heard more bad than good about centerforce.


2004 Grand Prix GTP (Competition Group)
SOLD-->1999 Z24 5M-#30 to register on JBO
"You can please some of the people some of the time but you can't please all the people'
all the time

So do you know if there is any way to tell if the centerforce is stage one or two? Like a part number?



http://members.cardomain.com/vertz24 1998 Z24 Convertible