I have a 96 LD9 5spd. the past week my master has been sucking air and was trying to fix it. i took it for a drive and was about 2 blocks from my house when my clutch stuck to the floor. i pulled it up with my foot and still had nothing so i tried to rev match a couple of the gears to get it to move (cause i was at a stop light) so i could get it off the road. just jumped out and pushed it into a parking lot finally

Now that i bled the clutch again it will not go into 4th gear. when you shift through the gears it does not even feel like there is a hole for the gear with the shifter. it just hits a wall and does not even start to go in. so i get under the hood and try to shift it into gear by hand and it wont budge. what did i f' up when i was trying to get it into gear.

by the way 1st 2nd 3rd and 5th are just fine. also reverse is pretty hard to get it in and out of now also. i just put a newer isuzu in it and shifted through gears awesome and no grind or anything. so i am worried i just blew another tranny. any help would be awesome


"sometimes the respect is more important..."