whats the easyest way to get the axles off the trany.
With a slide hammer and an axle attachment
Or a socket, a piece of wood, and a baby sledge hammer.. usually how I end up doing it.
four wheeler and a tow strap lol, should be able to get two screwdrivers or pry bars in beween the tranny and joint housing on the axle, just keep prying til it pops out.
i use a long pry bar and put it between the tranny casing and the wide part of the shaft adn push the bar towards the opposite side of the car they pop right out, don't just pull by hand if you intend on reusing them you will pop the CV apart
JBO since July 30, 2001
Rich Grayo Jr. wrote:pull. then pull some more. then keep pulling.
leverage is the best way ie pry bar
THERE CAN BE ONLY ONE, i have already died once and im still here so lets just leave it on the track
