This is a friggin epidemic. 3 in the span of a week.

My clutch fluid is leaking onto the ground. Was told it was the hose that goes from the clutch to the trans.Where is that hose located?

What other possibilities is it, since it is leaking externally are the master/slave cylinders fine?

Since you know this is not the first post about this in one week, why not read the others. I know one of them had the same symptons as you. Meaning probably the same issue.



FU Tuning

there's a hose from the resevoir to the master cyl. then from the master cyl there's a line that goes to the slave.

where is it leaking from exactly?
if its leaking from the inside of your bellhousing then its the slave...
if its leaking from the line where it attaches to the slave..make sure the line is inserted fully and the clip is seated fully (it only goes in from 1 angle)

also there's a few bits in pieces inside that area where it connects to the slave.. like a spring etc. if you lost one of those parts it might cause a leak. there's an assembly pic somewhere on the org of how it all goes together.

14.82 @ 97 mph

Should be your master/slave cylinder, mine just came in today i'm actually about to go outside and fix it right now :|

Yep, it was my slave cylinder. All good now !