A/T M/T swap wiring help - Transmission Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
A/T M/T swap wiring help
Saturday, May 02, 2009 2:10 PM
so i'm doing this eco swap using an auto harness on a stick tranny. i'm not wiring in a clutch saftey switch, and need to know how to wire it up for the starter. i've read its the plugs on the trans.... a thick purple and a thick yellow. unfortunataly there is no yellow wire on mine. where is the yellow wire? is it coming off of the key


------------------------------------------------------------------------------------------------------------------------------
Mike wrote:The auto to manual swap is not as involved as you would think.
Get all the parts you need in a pile, and drive the car into it.
They will find their way into the correct places.


Re: A/T M/T swap wiring help
Monday, May 04, 2009 9:52 AM
anyone? i've found the starter going to the bendix (sp) but cannot find the "thickest yellow wire" the only yellow is a 20 AWG, at least its around that size. someone please help i cant find the wire on the starting circut only the wires on the circut for when the key is at the "on" position, never starting.


------------------------------------------------------------------------------------------------------------------------------
Mike wrote:The auto to manual swap is not as involved as you would think.
Get all the parts you need in a pile, and drive the car into it.
They will find their way into the correct places.

Re: A/T M/T swap wiring help
Friday, May 08, 2009 6:45 PM
the thick yellow wire is the one that goes into the safety swich and it comes out purple, stick your head under the dash of a 00-02 and you'll see what im talking about



Re: A/T M/T swap wiring help
Wednesday, May 13, 2009 2:18 PM
the interior harness is for an automatic. still haven't got this figured out, luckily i'm in no hurry


------------------------------------------------------------------------------------------------------------------------------
Mike wrote:The auto to manual swap is not as involved as you would think.
Get all the parts you need in a pile, and drive the car into it.
They will find their way into the correct places.

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search