Well I have a leak, and from what a few techs have told me, I'm hunting an elusive part.... I put some 3500 psi plastic weld on it too see if I could fix it and get it home, but the clutch still hits the floor....could it have ruined my slave?? Anyone know of an aftermarket replacment? Does any one have for sale?

I really wish there was some kind of connection to put on the master and slave ports and get down to like a -3AN or something to run a SS line between the two. Anybody know of anything? I've looked and can find nothing.

As far as your slave problem, you can get slaves quite easily actually. You can get them from GMpartsdirect.com and I think I've also seen them at Rockauto.com

If the line is your problem you will have to get one from a junk yard or the stealership.


"Never argue with an idiot. They'll drag you down to their level, then beat you with experience!" -Anonymous

Napa has the slave/TOB also....

And just use the stock fitting..... it works fine..... although AN fitting would be nice...... GM doesnt think about things like that I quess.

Yea my slave is fine, the line is the problem...you know where it comes up by the battery and it has those S curves...its on one of the curves...I put some 3500 psi plastic weld on it..and bleed the line....now it works fine, with a little leak still. Will still need to find that line, eventually.....