I have a 1995 2.2l ohv cavalier. Im on my 2nd trans because the caseing keeps breaking.I want to do a build but the iszuzu wont hold any more power. so my question is will any getrag tranny out of the 2ks bolt up to my engine block. I know i have to relocate the tranny mounts. but what else do i have to do? thanks
Not just any will bolt up. Just like the Isuzu transmission, the getrag still have different bell housing for the 2.2 and 2.4. As long as you get one from a 2.2 you will be fine.
"Oil Leak ? What oil Leak ? Oh, Thats Just The Sweat From All The HorsePower!!"
i read somewhere tht you have to use the 2k's master cylinder. and will all my hydrolic clutch work fine with the 2k's getrag. thanks for the help
stay with the isuzu, the sh!trag tranny sucks, we have one in the new j, and since my car is down for a little bit Im forced to drive the '01, isuzu can handle the power and a stronger tranny in my experience(although some may not agree)and for a 2.2 your not going to make much horsepower out of it, the metel used for the bellhousing is the same, find out whats causing it as a new tranny will just do the same thing, but if you must.....grab one out of any j with 2.2, relocate the mounts, get the shift cables, and if you get the tranny without shifter assembly then get one, you will need a new clutch as the clutches are different, I believe you will have to either machine flywheel(IF in good shape), or buy a new one.
"As I lay rubber down the street, I pray for traction I can keep, but if I spin and begin to slide, please dear God protect my ride." -Amen
