I have an option of picking up some 19's at a great price. Has anyone tried squeezing them under theirs? I have an 04 sunfire that currently has 1/4 inch spacers. Any tips to fit the 19's, or am I wasting my time? The tires are 235/35/19. Thanks for any help!

There are alot of peeps here rolling on 19s including myself. Pics of mine can be seen here..... http://www.j-body.org/forums/read.php?f=46&i=159456&t=159456&start=0

Everyone on 19s would tell you that you will have to get your fenders (all 4 corners) rolled. And depending on the offset you get, you might rub the inner fenders when you turn full crank.

As for me, I have 19x8 (+35mm offset) and I have no problems. No rubbing inside the fender wells and fenders arent rolled.

You can run 19's, those tires are to big tho.


2012 HD VRSCF
2010 Ford Explorer
2006 Ford Ranger
2004 Chevy Cavalier

Hey FlipSpeed, how big is the lip on those rims? Do you think thats the lowest you could go without rubbing the fenders? Don't mean to hijack your thread Gabe.

I've been on 19s for 3 years now and I only had to rework my front fender lips. The rears werent touched.

235/35/19 will work, that's what i'm running right now. i've had 19's for quite awhile,
haven't had any problems with rubbing. my fenders aren't rolled either.

I have 19 x 7.5 with a 42 offset, I didn't have to roll my fenders or anything. I did have to shave off my spring plate in the front cause it was touching my tire but other than that it is fine. I am lowered 3" in the front and about 2.5 " in the back...
I love my 19's...I would never go back!




UNDER CONSTRUCTION!!!
Check out my site http://members.cardomain.com/lil_z