im wantin to run 19's but i was wonderin if or how bad they rub and if i need to do any mods to use them.
I'm running 20's on mine and no problems. All you need is a 225/35/19 series tire and no more than a 19x8 wheel. If your lowered more than 1.5 inches, you may need to roll your fenders. If not, you should be able to slap em' on and ride out without any issues.
a 7.5" wide wheel would be prefered. also try to look for a 42mm offset.
see thats the problem.im lowered like 1.5 in the front and 1.75 in the rear.
it should be fine but if not, then simply roll the fenders.
i should'ev took of all this before i got it painted huh?
rolling your fenders isnt hard. all you do when you roll your fenders is push the lip out in the wheel well to give more clearance.
ight.i think ill be ok cause i hav a lot of clearance right now.i may find a set and try em first.
Now that I think about it. You shouldn't rub really.. if the offset is correct and the tire size if fine. You should be barely be any larger than the overall diameter wheel/tire your using now.
Eternal wrote:Now that I think about it. You shouldn't rub really.. if the offset is correct and the tire size if fine. You should be barely be any larger than the overall diameter wheel/tire your using now.
eh.im runnin a 205/40/17 on a 7-1/2 in. wheel.and if you look at my pics you can see that they're too small.like the sidewalls are angled instead of straight.
I think this is the 1 millionth time ive said this but 19's fit without any mods
run like a 19x8 max with 225/35/19 you will be fine it is all to do with the offsets im running a 19x8.5 in my front with no modification at all lowered almost 2.25 " in the front now
i dont consider rolling the fenders a modification
StrippedCav98 (Now Quotable) wrote:i dont consider rolling the fenders a modification
your kidding me right does modify not mean a modification made to a factory vehicle.
I cut my Fender lips COMPLETELY OFF my Fenders at the top. I have 19x8's on a 215/35/19 and I can roll and TURN with NO air in my bags.
The rear needs no modifying on my sedan.
[IMG][/IMG]
I'm looking to trade my 19's to someone look in the SOUTHEAST forum...
BuMmRz wrote:StrippedCav98 (Now Quotable) wrote:i dont consider rolling the fenders a modification
your kidding me right does modify not mean a modification made to a factory vehicle.
i understand the definition of modification. all im saying is as simple as rolling the fenders, i dont really consider that a modification being that its so insignificant.
