Looking to get some ideas for my sunfire...post pics of your modded sunfires?? Also, anyone that has a cavi dash pics?? I have a cavalier dash swapped in, and looking at ideas when glassing it..
"Hondas are like tampons, every pussy has one!!!"
from the top ./ black leather will be gone soon. sunfire dash . .and door cards/
with the angle of the pic without you saying the dash is leather I dont think anyone would be able to tell... but on the other hand..damn thats a nice looking interior..
Got Chevy? wrote:with the angle of the pic without you saying the dash is leather I dont think anyone would be able to tell... but on the other hand..damn thats a nice looking interior..
He didn't say that the dash was leather. He just said it's a sunfire dash.
so he didnt.. missread, no harm though..just stating it was hard to tell .
lo.... he didnt say what angle to post. long as you can see the top dash, i think its still a viable pic hahah
custom dash painting. looks really good, did an entire blue theme in my interior
null
you really left the lighter in?
I'll be doing a different setup in the spring.
219whp - I <3 whine
Tinkles wrote:
I'll be doing a different setup in the spring.
how much modification did it take to get the gauge and controller there? wanting to do something similar. just not sure how to do that.
1999 2.4L w/ nitrous
^^^^....Nice...all are nice...mine is stock so no help there, david.....but a very clean,scratch free dash......in the works...need gauges and more resin....
2003 Cavalier
Stock 2.2 Liter, 5 speed
" Leave the rice to Uncle Ben's and the wings to KFC..
Go clean or go home. "
z24cavi55z24 wrote:
how much modification did it take to get the gauge and controller there? wanting to do something similar. just not sure how to do that.
More than it should have. It was my very 1st fiberglass project and i did everything the hard/stupid way.
I used 2" PVC to make the gauge holder and i super-glued a random piece of plastic in the vent area to box off the controller area.
I hand formed the back of the "pod" which was a PITA(and also the wrong way).
Then i built the area up around it with a @!#$load of bondo(wrong way again)
After a month of working on it i finally was happy with it. And installed it.
I repainted it last spring because i had no clear coat over the flat black and after one summer it looked like @!#$. Now it is gunmetal with clear coat and the paint is holding up alot better.
Also, FYI even thou i did go about this the wrong way it has held up with no cracking, separating, anything for 2 years.
219whp - I <3 whine
if you got rid of the cig lighter, how do you charge your cell phone!?!?!
jk looks pretty good
At home...
I have another "cig lighter" on the center console in the passenger side foot well.
219whp - I <3 whine
Here is mine, all stock aside from a couple painted parts.
only pic of my dash, i think a year ago, sense then I've sanded, painted,cleared and its holding strong except i cracked the dash last week when i took it out and weather's been @!#$ty so i havn't wanted to work on it ill take new pictures when i get my FG and gauges put in
Ignore the god awful kickpods in the background, they've been taken care of.
I'll be doing DoubleDin this summer if I can get my Alpine discount again.
left it in so that the paint wouldnt go into the actual socket. i dont smoke so i didnt need the lighter
could of taped the socket
bradsk88 wrote:
Ignore the god awful kickpods in the background, they've been taken care of.
I'll be doing DoubleDin this summer if I can get my Alpine discount again.
I want to glass my single din in like that but The Sunfire dash makes it difficult to make it look right.
Heres my dash paint project. Didnt follow the sticky 100% because of lack of supplies and money but i like it.
(After 2.5 hours of hand sanding. Power sander wasnt working)
(2 coats of primer)
(Finished product)
Its not glossy like it should be. I plan to sand it down a bit, rebuff it, polish it, more clear coat, possibly even some laquer to make it really shine.
