I did a search but couldnt find anything. I really need to know what size screws hold down the vent located at the center of the dash and does anyone know where i can get them..thanks

its kinda like a hex screw mine was i needed hex bit to remove
best bet to get one is the dealership or a junkyard
as for size all i can say it aint big
hope i helped


00 back from body shop pics coming soon

Dude I would totally call the parts dept. at the dealer. Might cost an extra buck, but you won't have to dig through a junkyard, etc.

Just so you know, I gave up on that screw a year ago - not really needed and saves a step when going into the dash.

just dont put it in. I didn't have one on my last cavi, and i left mine off of my new cavi the first time i took off the dash... but if you really want one, call the dealer and thell them you need a 7mm dash screw for the cavi/sunfire... You can use a hex, but a 7mm and a small extension work much easier. It should only cost you like a buck at the dealer, or if you go to a junkyard, it will be free .